Discontinued Hunter HPV

Hunter HPV valve discontinued — what replaced it, and what still exists

Hunter retired HPV in the mid-2000s. If a failed valve in the ground still says HPV-100G (or HPV-100-G-NI on a distributor ticket), this is the cross-reference: family table, surviving parts, and the PGV successor.

  • HPV-100G New Old Stock
  • HPV → PGV footprint
  • NI suffix explained
Shop HPV-100G NOS See the family table
1

Read the body stamp

HPV-100G is 1″ globe, no flow control. 101 means flow control. A means angle. S/B are thread options — not NI.

2

Decide rebuild vs replace

Solenoid still exists. Diaphragm, bonnet, spring, and screws do not. A torn diaphragm means a new valve.

3

Match the successor

PGV-100G is the 1″ FNPT globe replacement. We also have sealed NOS HPV-100G while this lot lasts.

Why HPV disappeared

Hunter replaced SRV and HPV with PGV

Hunter discontinued the SRV and HPV residential valve lines and moved the market to PGV. Current Hunter support documentation treats HPV as discontinued and lists a single remaining HPV service part: the solenoid assembly. The last HPV product literature Hunter published, LIT-224, is dated 5/06 — that is the public sunset marker.

Near-zero organic volume exists for the exact SKU. The searches that convert are Hunter HPV replacement, what replaced the Hunter HPV valve, and paperwork that still shows HPV-100-G-NI. Those queries are answered here, then linked to the HPV-100G New Old Stock product page.

Identify the body

Original HPV family

ModelConfigFlow controlPGV successor
HPV-100G1″ globeNoPGV-100G
HPV-101G1″ globeYesPGV-101G
HPV-100A1″ angleNoPGV-100A
HPV-101A1″ angleYesPGV-101A

Factory options: S slip × slip (globe only), B BSP threads. Field options: R reclaimed handle, DC latching solenoid, CC conduit cover.

There was never an “NI” factory option. HPV-100-G-NI is distributor ERP formatting of a standard HPV-100G. If that string is on an as-built or invoice, order the HPV-100G — not a different valve.

Cross-reference

HPV vs PGV — same 1″ FNPT footprint

A PGV-100G drops into the same 1″ female NPT globe footprint as HPV-100G. Do not swap an angle body for a globe, or FNPT for slip/BSP, without looking at the threads.

Current PGV successors we stock: PGV-100G 1″ globe (no flow control), PGV-101G 1″ globe with flow control, PGV-101A 1″ angle with flow control, and PGV-100MB male × barb globe.

If the site is still standardized on HPV and you want the original body, buy HPV-100G New Old Stock — singles or a case of 20.

Hunter HPV-100G 1 inch globe valve next to a PGV-100G successor for size comparison

Parts that still exist

Surviving vs discontinued HPV rebuild parts

PartHunter no.Status
AC solenoid606800Current — in stock
DC latching solenoid458200Current — in stock
Bonnet266602 / 266702Discontinued
Diaphragm266902Discontinued
Spring266000Discontinued
Support ring265000Discontinued
Bonnet screw266100Discontinued

Macro of the molded HPV-100G part number on a genuine Hunter valve body

HPV replacement FAQ

Is the Hunter HPV valve still made?

No. Hunter discontinued the HPV and SRV lines in the mid-2000s. The last HPV product literature (LIT-224) is dated 5/06. Hunter still stocks the HPV solenoid assembly; other rebuild internals are gone.

What replaced the Hunter HPV?

The Hunter PGV family. For a 1" FNPT globe with no flow control, the current equivalent is PGV-100G. With flow control, use PGV-101G. Angle bodies map to PGV-100A / PGV-101A.

What does the NI in HPV-100-G-NI mean?

Nothing from Hunter. There was never an NI factory option. HPV-100-G-NI is a distributor inventory-system formatting of the standard HPV-100G.

Will a PGV-100G fit where my HPV-100G was?

Yes for a 1" FNPT globe — same female NPT footprint. Confirm you do not have an angle body or slip/BSP threads before ordering.

Can I still buy a genuine HPV-100G?

Yes, while this New Old Stock lot lasts. Big Irrigation Supply has sealed factory HPV-100G valves in singles and cases of 20 at https://bigirrigation.com/shop-products/irrigation/sprinklers-valves/valves/hunter-hpv-100g-1-inch-globe-valve/.

Can I still get rebuild parts for my HPV?

The AC solenoid 606800 and DC solenoid 458200 are still available. Bonnet, diaphragm, spring, support ring, and bonnet screws are discontinued. If those have failed, replace the valve.

Need the original HPV-100G while stock lasts?

Sealed factory New Old Stock. Singles at $39.95. Case of 20 at $599 ($29.95 ea.) for service companies still maintaining legacy HPV sites.

Buy Hunter HPV-100G Need more than 30 cases?
Review us on TrustpilotTrustpilot

Terms & Conditions of Sale

PLEASE READ THIS DOCUMENT CAREFULLY. IT CONTAINS VERY IMPORTANT INFORMATION REGARDING YOUR RIGHTS AND OBLIGATIONS, INCLUDING LIMITATIONS AND EXCLUSIONS THAT MIGHT APPLY TO YOU.1. Agreement Scope: When you order products from the Big Irrigation Supply website, you agree to these terms. The supplier can change these terms without notice, and the most current version will be on the website.2. Order Acceptance and Cancellation: The supplier may accept, decline, or limit your order for any reason after receiving it. If your order is canceled after your card is charged, you will be refunded. Minimum order amounts apply and can change without notice. Customer cancellations will incur a credit card charge up to 4%.3. Pricing: Prices are subject to change and do not include taxes. Any taxes applicable will be added to the price, and you must either pay them or provide a tax exemption certificate.4. Payment Terms: Full payment is required before shipping, and you can pay online via credit card.5. Shipping and Risk: Ownership of the products transfers to you either when the products leave the supplier’s location or when they are delivered to your address, depending on the delivery method. You are responsible for shipping costs and must inspect deliveries for damage or discrepancies upon receipt.6. Warranties and Returns: Products are generally covered by the manufacturer’s warranty, details of which are provided in the product description or manufacturer’s website. Returns require prior authorization and must be made within specific time frames. A restocking fee may apply of up to 35%. Non-returnable items from Big Irrigation Supply specifically include all landscape lighting fixtures and transformers, as well as irrigation commercial controllers like MC-E and ACC2 models. Additionally, any items that are not regularly stocked or are special order items cannot be returned.7. Intellectual Property: The supplier owns any content, inventions, or intellectual property developed during the term of your agreement with them.8. Advertising and Liability: The supplier is not responsible for inaccuracies in product descriptions provided by their suppliers, nor for typographical or pricing errors. They also disclaim all implied warranties and limit their liability for any damages arising from the use of their site to the amount you paid for the products.9. Indemnification: You must defend and indemnify the supplier against any claims or damages arising from your use of the products, or any breach of these terms.10. Legal: The agreement is governed by the laws of Texas, and any disputes will be handled in Collin County, Texas, without a jury trial.11. Force Majeure: The supplier is not liable for delays or failures in delivery caused by circumstances beyond their control, such as natural disasters or labor strikes.12. Miscellaneous: If part of these terms is found to be unenforceable, the rest still applies. Provisions that by their nature should survive the termination of the agreement will do so.