- 10 year trade warranty and 100% water tested
- 225 PSI (15.5 BAR) rating
- S24B high-efficiency solenoid for positive opening at high pressures; includes stainless steel actuator and brass threads for long life
- Bronze body and cover with stainless steel bolts
- Bronze material with 82% copper content
- Reverse flow design for water conservation in the event of failure
- Diaphragm’s self cleaning ports constantly flex, inhibiting sand and silt from blocking valve action
- Brass shock cone for smooth operation and reduction of water hammer
- Easy-to-use internal manual bleed lever; bleeds valve downstream; has positive stops for open and closed positions
- Brass non-rising flow control stem throttles valve from full open to closed position
- Excellent for low volume irrigation
- Contamination-resistant (CR)
- Chlorine- and chloramine-resistant EPDM diaphragm material
Weathermatic 8200CR 2” Red Brass Bronze Bullet Valve (8200CR-20D)
$556.00 /each
Weathermatic 2 in. 8200 Series Replacement Valve Diaphragm (30-303DMSA)
$59.99 /eachWeathermatic 8200CR 3” Red Brass Bronze Bullet Valve (8200CR-30D)
Weathermatic
$1,190.00 /each
In Stock
FLOW RANGE
0.2 to 400 GPM (0 to 90.0 m3/hr)
ELECTRICAL
24VAC/60HZ 24VAC/50Hz
Inrush: 9.86 VA Inrush: 10.7 VA
Holding: 5.69 VA Holding: 7.5 VA
3” Red Brass Valve – 24VAC with Flow Control
Length: 8.75″ (22.23 cm) Width; 7.00″ (17.78 cm) Height: 8.50″ (21.59 cm)
Additional information
| Weight | 10 lbs |
|---|---|
| Brand |
You must be logged in to post a review.










Reviews
There are no reviews yet.