Hunter Golf Rotor Primary Nozzle #25 Blue (Pack of 10)
Genuine Hunter primary nozzle 272102SP — #25 Blue.
Source: Hunter GI-019 F 9/24. Sold as a pack of 10.
Order carefully — avoid returns
- Special order: Not stocked on the shelf. Ordered from the distributor after you buy — typically ships in 7–10 days.
- Rotor family matters: A “#18” for G-880 is
272111SP; G-870/G-875 and G-990 use different P/Ns for the same number. - Pack of 10: Individual 272xxxSP listings are Hunter packs of 10, not a single tip.
- Assortment packs include short- and mid-range secondaries for that primary range (except 461204SP primary one-each).
- Performance tables below are from Hunter’s TTS-880 / G-880 / G-80B chart. Confirm pressure and spacing for your design.
What’s Included
- Ten (10) #25 Blue standard-trajectory primary nozzles — P/N
272102SP - Not included: short-range, mid-range, or plug (order separately or via a nozzle assortment pack)
Companion nozzles (G-880 / G-80B chart set)
Hunter performance charts rate the full set. For #25 Blue that is:
- Short-range: Tan
803611SP - Primary: #25 Blue
272102SP - Mid-range: Light blue
315311SP - Plug:
315300SP(front of housing)
Key Specifications
- SKU / UOM: 272102SP — Pack of 10
- Fitment: G-880, G-884, G-885, G-80B, G-84B, G-85B (where this nozzle number is offered)
- Trajectory: Standard (not low-angle 3017xxSP)
- Availability: Special Order, Ships in 7-10 Days
- Source: Hunter GI-019 F 9/24
Performance Data (Hunter G-880 / G-80B)
#25 Blue — TTS-880 / G-880 / G-80B performance*
Set: Short Tan 803611SP | Primary #25 Blue 272102SP | Mid Light blue 315311SP
Nozzle plug P/N 315300SP installed in the front side of the nozzle housing (Hunter note).
| Pressure (PSI) | Radius (ft) | Flow (GPM) | Precip in/hr ■ | Precip in/hr ▲ |
|---|---|---|---|---|
| 65 | 71 | 28.6 | 0.55 | 0.63 |
| 70 | 73 | 29.7 | 0.54 | 0.62 |
| 80 | 74 | 31.7 | 0.56 | 0.64 |
| 90 | 75 | 33.7 | 0.58 | 0.67 |
| 100 | 75 | 35.8 | 0.58 | 0.67 |
■ Square spacing ▲ Triangular spacing. *Hunter preliminary performance data. Values are for the full nozzle set (short + primary + mid) on G-880 / G-80B — not a single tip alone.
Chart source: Hunter G-880 nozzle performance.
Frequently Asked Questions
Is this one nozzle or ten?
Pack of 10 per Hunter parts list.
Will this fit a G-990?
No — G-990/G-995 use different primary P/Ns (460011 / 464363–464368 / 460012).
Do I need short and mid too?
Yes for a complete opposing-nozzle set. Buy companions above or an assortment pack that includes short/mid for this range.
When will it ship?
Special Order, Ships in 7-10 Days.
