Hunter PILOT-SG Surge Protector for Pilot Two-Wire Paths
The Hunter PILOT-SG is the inline surge suppressor for Pilot Integrated Hub two-wire networks. Use it with a proper ground rod or plate—especially on DIH rotor control systems that require dedicated surge protection.
Key Specifications & Features
- SKU: PILOT-SG
- Brand: Hunter
- Product Type: Surge protection module
- System: Pilot Integrated Hub
- Path Input: Red / Blue
- Path Output: Red / Blue
- Ground: Bare copper to ground rod/plate
- Typical Spacing: ≥1 PILOT-SG per 12 DIH rotors (or per project spec)
- UPC: 611698005248
Compatible Systems
Designed for Hunter Pilot Integrated Hub / Pilot decoder two-wire systems. Not for ACC ICD decoder controllers.
Frequently Asked Questions
What does the Hunter PILOT-SG do?
The Hunter PILOT-SG protects the Pilot two-wire path from electrical surges. It passes red/blue path signals and bonds a copper lead to an approved ground rod or plate.
When is PILOT-SG required?
DIH rotor control systems require grounding with Pilot-SG surge suppressors. Hunter typically recommends at least one PILOT-SG for every 12 installed DIH rotors, or as specified by the project.
How do I wire the PILOT-SG?
Connect red/blue input and red/blue output in the two-wire path, then bond the copper lead to the grounding electrode. Keep connections waterproof and follow Hunter grounding details.
Does PILOT-SG replace station decoders?
No. PILOT-SG is surge protection only. Station control still requires PILOT-100 / PILOT-200 / PILOT-400 (or other Pilot two-way modules).
