Rain Bird 5000 Plus Shrub Part-Circle Rotor with SAM, PRS, and Flow Shut-Off, Non-Potable, Case of 20 (Y65570NP-CASE)

Rain Bird 5000 Plus Shrub Part-Circle Rotor with SAM, PRS, and Flow Shut-Off, Non-Potable, Case of 20 (Y65570NP-CASE)

This carton is 20 Rain Bird 5000+SPCSAMRN rotors, manufacturer Y65570NP. Rain Bird 5000 Plus Shrub Part-Circle Rotor with SAM, PRS, and Flow Shut-Off, Non-Potable is the single-head configuration inside the case. Rain Bird publishes this head as a shrub body for riser mounting. Performance figures below are the series ranges Rain Bird prints for the nozzle set, not a single-nozzle promise.

Key Specifications

5000 Series figures below come from the Rain Bird page for this model, plus the case quantity.

• Case quantity: 20 rotors
• Manufacturer model: 5000+SPCSAMRN
• Manufacturer SKU: Y65570NP
• Inlet: 3/4 in. NPT female
• Body: shrub body for riser mounting
• Published radius range: 25 to 50 feet. Radius may be reduced up to 25% with the radius reduction screw.
• Published pressure: 25 to 65 psi
• Published flow range: 0.73 to 9.63 gpm across the nozzle set
• Published precipitation rate: 0.20 to 1.01 inches per hour
• SAM check valve: holds up to 7 feet of elevation
• PRS: regulates nozzle pressure to 45 psi
• Plus flow shut-off: included on this Plus model
• Cover: non-potable

How many rotors are in this case?
The case contains 20 Rain Bird 5000+SPCSAMRN rotors, manufacturer Y65570NP.

What arc does this model cover?
This is a part-circle model. Rain Bird specifies reversing arc adjustment from 40 to 360 degrees.

Which options does this model include?
This model includes a Seal-A-Matic (SAM) check valve that holds up to 7 feet of elevation, PRS pressure regulation to 45 psi, Plus flow shut-off, and a non-potable cover. It does not include a stainless riser.

What inlet and radius does Rain Bird publish?
Rain Bird lists a 3/4 in. NPT female inlet and a radius range of 25 to 50 feet for this series. Published flow is 0.73 to 9.63 gpm across the nozzle set. Match the nozzle and pressure to the site before you set spacing.