T5HPE-RS

Toro 12” T5 RapidSet High Pop Effluent Rotor (T5HPE-RS)

$49.00

In Stock

The Toro T5HPE is a gear-driven, 12″ high-pop rotor sprinkler from the T5 Series that has a lavender-colored rubber cover to indicate the usage of an effluent, reclaimed water system. The Toro T5HPE has a 3/4″ NPT inlet. This gear-driven, 12″ high-pop rotor sprinkler is for use with reclaimed, non-potable water and has a pressure rating of 25 – 65 psi. The rotor assembly comes standard with a 3.0 gpm nozzle that has a 36′ – 40′ spray radius, but the flow rate and spray radius can be altered. Each Toro T5HPE rotor comes with a nozzle tree of 8 standard-trajectory nozzles (25 degrees) and 4 low-angle nozzles (10 degrees). The spray arc can be set at a minimum of 40 degrees through a full-circle maximum of 360 degrees. A small slotted screw driver is all you need to adjust the arc from the top of the sprinkler, while it is popped up or down. This Toro T5HPE rotor has a 5-year warranty.

Toro 12” T5 RapidSet High Pop Effluent Rotor (T5HPE-RS)
$49.00

Arc adjustments from 40° to 360° can be made quickly with a few twists of the turret – no tools required. The patent-pending RapidSet slip clutch also protects against gear damage caused by intentional vandalism or inexperienced users.

The T5 RapidSet rotor comes with a full set of 8 standard nozzles (25° trajectory) and 4 low angle (10° trajectory) nozzles. The nozzles’ unique geometry creates a zone of low pressure just below the main stream to gently guide water downward for unmatched uniformity without forcefully washing out newly laid seeds.

Easily replaces most competitive 4” pop-up rotors in the same footprint, but delivers an extra inch of nozzle clearance.

Commercial-grade 304 stainless steel riser and nozzle base sleeves help prevent ‘stick-ups’ and eliminate scoring of the riser caused by coarse and sandy soils.

Additional information

Weight 1 lbs
Brand